How to Change Your Boat Drive Lube

 

broken image

To keep your marine gears running smoothly, it is essential to regularly check the level of your drive lube. You can do this by using an Easy-Access Drive Lubricant Monitor, which can be easily accessed from inside the boat. A low sleeve will cause a warning light on your gauge to flash. However, if you do not see this indicator, you may not be aware that the hull of your boat is damaged, and you should get it serviced. You can visit Fathombay to find more about the boat drive lube.

 

 

If you have a Mercury or other brand, you can use Hi-Performance gear lube. This lube comes in quart containers and has a pump. You should drain the clump of accumulated gear sludge into a large container, then pour in a new quart of gear sludge. Don't forget to replace the bottom drain/fill plug. If it is low, you should add lube to the bottom of the drive.

 

After cleaning the drive, it is time to change the gear lube. The easiest way to do this is to drain the old gear sludge, replace the bottom drain/fill plug, and then reinstall the vent plug. Then, the engine should be run to check the new gear sludge. Make sure the new lube monitor is full and that the oil is working correctly. If it is low, you should replace the old lube and the oil is good to go. You can view here to learn more about the boat drive lube.

 

Once the drive is clean and free of debris, you can change the gear lube. This is a simple process. You can purchase quart-sized containers of gear lube from any marine retailer. To fill the drive, you should remove the upper drive and empty it into the bottom. You should drain the old gear sludge, then replace the vent plug. When the gear sludge is completely empty, you need to replace the oil.

 

A boat drive lube should be replaced at least once a year. It is best to replace the lube at least once a year to keep the gears running smoothly. A good lube will ensure a long life of your marine gears. In addition to the lube, you should also check the water level in the engine compartment. If the engine is low, the water pressure may not be sufficient to move the gears. This link https://simple.wikipedia.org/wiki/Boat will open up your minds even more on this topic.